How to assemble the lid of my pan?

How to Assemble the Lid Knob

Follow these simple steps to securely attach the knob to your glass lid.

1. Identify the Components

Before you begin, lay out the following parts:

• A: Glass Lid
• B: Steel Base (Plate)
• C: Steel Knob
• D: Red Silicone Seal (Gasket)
• E: Metal Screw and Washer

2. Position the Knob and Base

Place the red silicone seal over the pre-drilled hole on the top of the glass lid. Then, place the steel base on top of the silicone seal, followed by the steel knob. Ensure all three pieces are aligned with the hole in the lid.

3. Insert the Screw

Turn the lid over carefully (or hold it steady) and place the metal washer over the hole on the underside. Insert the screw through the washer and the lid, threading it directly into the bottom of the steel knob.

4. Tighten Securely

Hold the knob firmly on the top side. Use your fingers to twist the screw clockwise until it is finger-tight.

Tip: For a more secure fit, use a screwdriver to gently tighten it. Do not overtighten, as excessive pressure can damage the glass lid.